Products

Cast & Forged[8]
Steel Round Bars[6]
Titanium Pipes[1]
Nickel[2]
Other Wire Mesh[1]
Ultrasonic[2]
Other Metals & Metal Products[2]
Dental Equipments[7]
Implants & Interventional Materials[1]
Springs[8]
Magic Tricks[6]
Other Toys & Hobbies[1]
Communication Cables[1]
Stainless Steel Strips[1]
Body Fluid-Processing & Circulation Devices[1]
Sunglasses[2]

Contact Person : Mr. Jason Leo
Company Name : Shenyang Tim-High Material Development Co., Ltd.
Tel : 0086-24-24697207
Fax : 0086-24-24697065
Address : Liaoning,Shenyang,17 Wensu ST HunNan Shenyang
Country/Region : China
Zip : 110168

NiTi 4 round wire

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Body Fluid-Processing & Circulation Devices

Provides the best cycling performances at 37C at body temperature.

This specification covers all necessary information for the purchasing of Nitinol #4 round wires having a diameter ≥ 0.001" (0.025 mm) and ≤ 0.040" (1.016 mm).

Product Definition

NiTi#4-CW	Nitinol #4 Cold Worked
NiTi#4-SE	Nitinol #4 Super-Elastic Straight Annealed

Add desired suffix to select oxide finish as described below in Surface Finishes.

Chemical Composition

The chemical composition of the material shall be equal to or better than those defined by ASTM F2063. THM meets or exceeds the following chemical composition requirements:

Element	weight %
Nickel	54.5 to 57.0 (Reference)
Titanium	Balance
Carbon	< 0.05 (500 PPM maximum)
Cobalt	< 0.05 (500 PPM maximum)
Copper	< 0.01 (100 PPM maximum)
Chromium	< 0.01 (100 PPM maximum)
Hydrogen	< 0.005 (50 PPM maximum)
Iron	< 0.03 (300 PPM maximum)
Niobium	< 0.025 (250 PPM maximum)
Oxygen	< 0.05 (500 PPM maximum)
Any Single Trace Element	< 0.1
Total Trace Elements	< 0.25

Transformation Properties

The fully annealed ingot austenite start (As) temperature shall be (-10)°C to (+10)°C when measured by DSC in accordance with ASTM F2004.

Materials ordered in the Super-Elastic Straight Annealed (NiTi#4-SE) condition will have a finish Af temperature between +14°C to +22°C when tested per THM procedures.

Applicable Wire Sizes and Standard Tolerances

(in accordance with ASTM A-555)

Specified Size (inches)	Standard Tolerance (inches)
Notes:1) Tighter tolerance available upon request.2) Out of round tolerance shall be one-half the total size tolerance
0.040 to 0.033	± 0.0008
< 0.033 to 0.024	± 0.0005
< 0.024 to 0.012	± 0.0004
< 0.012 to 0.008	± 0.0003
< 0.008 to 0.0048	± 0.0002
< 0.0048 to 0.001	± 0.0001

Mechanical Properties

All Mechanical Testing Conducted at 22°C ±2°C

Cold Worked Wire (NiTi#4-CW)

The cold worked wire shall conform to the following mechanical properties:

Cold Work	45% ±5%
Ultimate Tensile Strength	200,000 PSI minimum
Tensile Elongation at Failure	4% minimum (as measured by the above referenced document)

Super-Elastic Wire (NiTi#4-SE)

Ultimate Tensile Strength	180,000 PSI
Elongation at Break	> 10%
Loading Plateau	> 65,000 PSI at 4% strain
Unloading Plateau	>15,000 PSI at 4% strain (after an initial strain to 8%)
Permanent Set after 8% Strain and Unloading	< 0.5%

Surface Finish and Appearance

Order Code Suffix	Description	Appearance
-EMP	Eched and Mechanincally Polished	Bright
-E	Etched Bright	Bright
-LO	Light Oxide	Gold to Brown
-P	Pickled	Dull Matte
-DK	Dark Oxide	Blue to Black
-BLK	Black Oxide	Shiny Black

Wire must be clean of contaminants, smooth, free from bumps, kinks, waves, scrapes, splits, burrs and other surface defects.

Quality Assurance Provisions

Each lot of material is to be manufactured from a single source of raw material under known process conditions.

Supplier will be notified of any revision changes to this specification.

Certification and Spool Labeling

A certificate of compliance to this product number shall accompany each shipment.

Each spool shall be labeled with the:

Product Type THM Manufacturing or Production # Heat # THM Part # Size Feet or Pounds (as applicable) Packaging

The wire must be wound evenly on the spools, with no breaks or tangles.

The maximum weight per spool shall be as follows unless specified otherwise on the purchase order.

Wire Size	Maximum Weight	Spool Type
0.001" to 0.003"	0.5 pounds	2.5"x3", Din 80, Din 100, Din 125, Steeger, NE #2, Wardwell Bobbins
> 0.003" to < 0.012"	5 pounds	2.5"x3", Din 100, Din 125, Weldwire Reel
> 0.012" to 0.018"	10 pounds	Weldwire Reel
>0.018" to 0.035"	20 pounds	Weldwire Reel

NiTi 4 round wire